On this iPhone 7 we’ve repaired broken data line on a second layer of the logic board after the customer tried to replace the LCD screen and accidentally used the wrong screw on the wrong screw hole and after that, because the screw was long it damaged the logic board and broke the touchscreen connectivity data line between CPU to LCD connector and because of that touchscreen wasn’t working at all. so we fixed the broken data line and touch screen starts working again.
We’ve received this iPhone 6s from Tanzania, East Africa and customer tried to replace LCD screen and unfortunately he damaged the LCD FPC connector and backlight filter on this iPhone6s. so we’ve replaced the LCD FPC connector and also replaced the backlight filter with new one and after that phone starts working without any issue.
Fixing iPhone 6 with “no service/Searching issue” or technically we call it baseband IC issue after this phone has been bent. We have removed the baseband ic and fixed the broken solder pads and also by run the wire jumpers and then we’ve reballed the baseband ic and installed it on board and result was successful and now the phone is working fine with full bar signal.
Reballing iPhone 6 NFC IC U5302_RF and Fix the Broken Solder Pads
iPad Air Error 4013 Solved by NAND Chip Repair .
Sony Xperia XA F3111 Sim Card Reader Replacement .
iPhone 6S Backlight Circuit Repair – Coils, Diodes, Capacitor
Repairing an iPhone SE with Charging Issues .
Repairing a Water Damaged iPhone 6 with No Backlight
Repairing an iPhone 6 with Microphone issue. Microphone function is working properly now after we’ve replaced the Sound IC Chip(Apple 338s1201)